Cat6 UTP 1 Pot (100 Plugs)
Cat6 UTP 1 Pot (100 Plugs) Cat6 UTP 5 Pots Cat6 UTP Box Cat6 UTP 5 Pots Cat6 UTP 5 Pots

Cat6 UTP RJ45 Easy Plugs

Connectix Easy RJ45 pass Through Connectors have been designed with speed and precision in mind.

EZ-C6-UTP

In Stock

Buy your everlasting EASY crimp tool here

1 Pot = 100 plugs
1 Box = 20 Pots

Our 'Easy' range of RJ45 pass through plugs are made from high quality engineered plastic with brass gold over nickel plating contacts.

For best results use with the 'Easy' crimp tool, it allows you to cut, strip and terminate a plug all in one. The Crimp tool Trims the excess wires as it crimps

Features & Benefits

  • Easy to verify RJ45 568A or 568B colour code
  • Gold Plated Contacts
  • For best results use Connectix Easy RJ45 Crimp Tool
  • Cat6 Performance


See below for the 4 step 'Easy' Instructions

easy crimp step 1
1Remove approximately 20mm of outer jacket using the multi-purpose crimp tool.
2Arrange wires into the correct colour code sequence (most commonly EIA/TIA 568B). Slot cable into the plug pushing the wires through. Outer sheath of cable should sit inside the plug as far up as possible.
3Press the ‘Lock’ Button on Crimp tool to open it ready for use. Insert the loaded RJ45 plug into the socket and squeeze the handle to crimp the plug, the excess wire will also be trimmed at the same time.
4If you have followed the instructions you should now have a fully working RJ45 Connection.