Netscout OneTouch AT G2 Ethernet Tester

Download Netscout OneTouch PDF


Download Connectix OneTouch PDF


Download Technical Drawing

OneTouch AT features

Versatile copper, fibre and Wi-Fi troubleshooting

Be ready for a broad range of troubleshooting scenarios with the handheld OneTouch AT G2 Network Assistant. The tester incorporates dual copper and fibre-optic test ports to facilitate troubleshooting of 10/100/1000 Mbps twisted pair and 100/1000 Mbps fibre ethernet networks. The dual ports simplifies inline packet capture and VoIP monitoring by eliminating the need for mirror ports or taps. For troubleshooting Wi-Fi networks, the OneTouch AT G2 tester incorporates an 802.11ac dual-band Wi-Fi radio with a 3x3 antenna. When connected to both wired and Wi-Fi networks the tester displays test results side-by-side on a single page to aid in problem domain isolation.

The OneTouch AT Network Assistant has a modular design. The 10G module is available for testing wired 100 Mbps to 10 Gbps ethernet switch port and link performance at up to 10 Gbps rate.

All-in-one testing from the patch cable & Wi-Fi to the cloud

When validating and troubleshooting the access network, one needs to test from where the client device is connected to the network—where the device could be a PC, tablet, smart phone, IP phone, printer, POS terminal, industrial equipment controller, medical imager etc. The OneTouch AT can prove that the network is good—by emulating the client device and measuring network performance. It measures, analyzes and documents the performance of each the critical network elements: the network cabling, the delivery of Power over Ethernet (PoE), the connection to the nearest switch, the connection to the nearest access point (AP), and the performance of key network services and server-based applications in the intranet, cloud or internet.

Standardized network validation and troubleshooting

Use the intuitive touch interface and the Setup Wizard to create test profiles, where a profile is a set of tests tailored to specific networks, services, and applications. Build profiles to accommodate different types of users, devices, locations or technologies. Profiles can be very simple with just a few tests or advanced with dozens of tests. Once created, profiles can be saved for quick and easy reuse. Create a library of standardized profiles to elevate the troubleshooting know-how of the entire network support staff. Share profiles with other OneTouch AT users. Use the profiles to establish best practices for consistent, faster, more productive troubleshooting and network acceptance testing.

Automated suite of tests with pass/fail analysis

Test everything defined in a profile automatically with the one-button AutoTest. The AutoTest progresses from the physical layer of the network through the wired and wireless infrastructure, to network services and userdefined applications. Clear pass/fail and warning indicators highlight potential problems. A top-level pass/fail indicator provides the overall AutoTest status at a glance.

Centralized cloud-based management

Organizations can claim their OneTouch AT units to the Link-Live Cloud Service. Claimed units will be visible from Link-Live as long as they are connected to the internet. They can be remotely managed when and where it is convenient using a smart device through its web browser. Users can upload, view and analyze test results, download latest software and test profiles, and control their OneTouch AT remotely.

Centralized report management

The Link-Live Cloud Service supports storing and viewing of test results from many NETSCOUT handheld network test products, such as LinkSprinter, LinkRunner AT, and AirCheck G2. A user can automatically receive an email after each test. The operator of the OneTouch can enter comments, such as test location, and/or upload picture(s) of the test environment by replying to the email results they receive. Multiple parties can access Link-Live over the web at anytime from anywhere using a smart device or PC via a web browser.

Test Features

Copper and fibre-optic cable testing (Supported with OneTouch AT G2 module)

Troubleshoot cable performance quickly by measuring twisted pair cable wiremap and length. Use cable identifiers and tone probe to locate and identify cables. Measure the optical power received through fibre-optic links. Verify the cleanliness of fibre-optic connections by viewing connector end faces with the optional USB video probe.

PoE testing (Supported with OneTouch AT G2 Module)

Verify the successful delivery of PoE with the TruePower™ load test. Emulate an 802.3at (PoE+) class 1-4 powered device and measure power up to 25.5 watts. See the requested and received PoE class, the pairs used, the PSE type, measured PoE voltage unloaded and under load, and PoE power under load.

Wi-Fi and wired client devices connectivity testing

Understand how a client device connects to the wired infrastructure by testing link negotiation, identifying the nearest switch, and monitoring key switch port statistics. The OneTouch AT with G2 module tests IEEE 802.11a, .11b, .11g, .11n and .11ac Wi-Fi networks. It shows how a client device connects to the Wi-Fi infrastructure by testing the link between the client and the nearest access point, identifying the AP name, channel and security type, observing the authentication and association process, and monitoring key AP and network statistics, including roaming details by the AP. For wired clients, the OneTouch AT with G2 module tests 10/100/1000BASE-T twisted pair and 100BASE-FX/1000BASE-X fibre-optic ethernet networks, while the OneTouch AT with 10G Module test RJ-45 test port for 100/1000/10GBASE-T and 1000 BASE-X SFP/10 G BASE-SR/LR SFP+ ethernet over optical fibre network.

Battery life Approximately 3-4 hours depending on type of usage, 4 hours to charge from 10% capacity to 90% capacity with the unit powered off
Battery type Lithium ion battery pack, 7.2 V
Display 5.7 in (14.5 cm) LCD with projected capacitance touch screen, 480 x 640 pixels
Operating altitude 13,123 ft (4,000 m), 10,500 ft (3,200 m) with ac adapter
Safety CAN/CSA-C22.2 No. 61010-1-04, IEC 61010-1:2001
EMC EN 61326-1:2006
Operating Temperature 32°F to 122°F (0°C to 50°C)
Storage Temperature -40°F to 160°F (-40°C to 71°C), -4°F to 122°F (-20°C to 50°C) for periods longer than 1 week
Storage altitude 39,370 ft (12,000 m)
Shock and Vibration Meets the requirements of MIL-PRF-28800F for Class 3 Equipment
Operating relative humidity (% RH without condensation) 5% to 45% at 32°F to 122°F (0°C to 50°C), 5% to 75% at 32°F to 104°F (0°C to 40°C), 5% to 95% at 32°F to 86°F (0°C to 30°C)
Dimensions (with module and battery installed) 10.3 in x 5.3 in x 2.9 in (26.2 cm x 13.5 cm x 7.3 cm)
Weight (with module and battery installed) 3.5 lb (1.6 kg)
AC adapter Input: 100-240 VAC, 50-60 Hz, 1.0 A Output: +15 VDC, 2.0 A
Memory Internal: 2 GB shared between system and user files, SD card: 8 GB, brand and model selected for optimal performance, USB 2.0 type A port: for use with USB mass storage devices
Management port One RJ-45 10/100BASE-T Ethernet, One USB 802.11 (requires optional adapter)
Network analysis ports Two RJ-45 10/100/1000BASE-T Ethernet, Two SFP 100BASE-FX/1000BASE-X Ethernet
Battery charging temperature 32°F to 104°F (0°C to 40°C)
Pollution degree 2
Wi-Fi adapter data rate 802.11a: 6/9/12/24/36/48/54 Mbps, 802.11b: 1/2/5.5/11 Mbps, 802.11g: 6/9/12/24/36/48/54 Mbps, 802.11n (20 MHz): MCS0-23, up to 216 Mbps, 802.11n (40 MHz): MCS0-23, up to 450 Mbps, 802.11ac (80 MHz): MCS0NSS1-MCS9NSS3, up to 1.3 Gbps
Wi-Fi adapter operating frequency 2.412 ~ 2.484 GHz (Industrial Scientific Medical Band), 5.170 ~ 5.825 GHz
Wi-Fi security 64/128-Bit WEP Key, WPA/WPA2 personal, WPA/WPA2 enterprise, 802.1X
EAN 754082128168
Manufacturer Netscout

Images are for illustrative purposes only.