Cat5e Accessories Products

Any accessories or extras you might need for your Cat5e installation can be found here, including things like plugs, boots and couplers

CCS Cat5e UTP RJ45 Plug

Quick view
Cat5e UTP Crimp plugs, available individually or in packs of 100

These Cat5e UTP RJ45 plugs are suitable for terminations on both Stranded Patch and Solid core Cat5e Cable. They are of single piece construction. More Info

Pack Size Quantity
View Range
CCS Cat5e FTP Shielded RJ45 Plug

Quick view
Shielded Cat5e Crimp plugs, sold individually

These Cat5e FTP shielded Rj45 plugs are suitable for terminations on both Stranded Patch and Solid core shielded Cat5e Cable. They are of single piece construction. More Info

Quantity
More Info
RJ45 Boot

Quick view
RJ45 Boots available individually

RJ45 Boots to provide strain relief and latch protection on RJ45 CablesThese Boots are suitable for use with Cat5e, Cat6 & Cat6a Stranded Cable. They can also be used on Cat5e & Cat6 Solid Cable.They will not fit onto Cat6a Solid Cable. More Info

Color Quantity
View Range
UTP RJ45 Through Coupler

Quick view
Coupler fitted with RJ45 female sockets at either end

Couplers suitable for linking two RJ45 Patch leads together, fitted with RJ45 female sockets at either end More Info

Quantity
More Info
Cat5e UTP RJ45 Through Coupler

Quick view
Cat5e UTP Coupler fitted with RJ45 female sockets at either end

Cat5e RJ45 Couplers suitable for linking two Cat5e RJ45 Patch leads together, fitted with RJ45 female sockets at either end More Info

Quantity
More Info
Cat5e FTP Shielded RJ45 Through Coupler

Quick view
Cat5e UTP Shielded Coupler fitted with RJ45 female sockets at either end

Shielded FTP Cat5e RJ45 Couplers suitable for linking two shielded Cat5e RJ45 Patch leads together, fitted with RJ45 female sockets at either end More Info

Quantity
More Info
Cat5e Inline IDC Coupler Box

Quick view
Inline Cat5e IDC Coupler for joining two Cat5e Cables

IDC Cat5e Inline Couplers provide an effective means of eliminating connection problems that may be encountered during voice and data installation (for example cable cut too short). It is also used when it becomes necessary to extend a cable run to a new location. Four pair UTP Cat5e cable can be joined together without compromising the Cat5e integrity of the system. More Info

Quantity
More Info
RJ45 Socket to D9 Female Modular D Adapter

Quick view
Modular adapter that has a DB9 female connector that plugs into DB9 RS232 serial port...

This RJ45 adapter is used to run RS232/Serial data over longer distances using Cat5e cable to bridge the gap. Used in pairs and have selectable pin assignment to enable them to be used for a variety of purposes. Features: Gold plated pin 28AWG wire Thumb screw More Info

Quantity
More Info
RJ45 Socket to D25 Male Modular D Adapter

Quick view
Modular adapter that has a DB25 male connector that plugs into DB25 RS232 serial port...

This RJ45 adapter is used to run RS232/Serial data over longer distances using Cat5e cable to bridge the gap. Used in pairs and have selectable pin assignment to enable them to be used for a variety of purposes. Features: Gold plated pin 28AWG wire Thumb screw More Info

Quantity
More Info
RJ45 Socket to D25 Female Modular D Adapter

Quick view
Modular adapter that has a DB25 female connector that plugs into DB25 RS232 serial port...

This RJ45 adapter is used to run RS232/Serial data over longer distances using Cat5e cable to bridge the gap. Used in pairs and have selectable pin assignment to enable them to be used for a variety of purposes. Features: Gold plated pin 28AWG wire Thumb screw More Info

Quantity
More Info
Basic Termination Kit

Quick view
Kit Includes RJ45 Crimp tool, Plugs, Stripper & Continuity Tester

This simple termination kit includes all the products required for terminating RJ45 Cable & Testing the finished leads. (cable not included) More Info

Boot Colour Quantity
View Range
CCS RJ45 Network Cable Continuity Tester

Quick view
A simple network tester to check continutity and connectivity

The Connectix Pocket Socket Tester is a quick, easy to use tool to verify connectivity. Its unique snap-together design makes it easy to take on-site. The tester gives an instant indication of the connections present, because its four bi-colour LEDs indicate the status of the pairs in the cabling. A separate indicator also shows the shield connection for shielded systems. The circuitry has been specially designed to identify crossover patch cords. But the tester is equally suited to check a single patch cord or a complete channel. Features:... More Info

Quantity
More Info

Previous
1
2
Next