Axis XP40-Q1765 INMETRO -60C IP security camera Outdoor Bullet Stainless steel
  • Axis XP40-Q1765 INMETRO -60C IP security camera Outdoor Bullet Stainless steel
  • Axis XP40-Q1765 INMETRO -60C IP security camera Outdoor Bullet Stainless steel

Axis XP40-Q1765 INMETRO -60C

IP, CMOS 1/2.9", f=4.7–84.6 mm, 1920x1080, PTZ, WDR, Day/Night, 256 MB RAM, 128 MB Flash
Out of Stock
Reference: 0836-031
Combining technologies



XP40-Q1765 Explosion Protected PTZ Network Camera is an AXIS Q1765-LE Network Camera (excl. IR LEDs and SD card, incl. wiper and support for washer, as well as pan/tilt) mounted inside an explosion protected stainless steel PTZ housing. The camera provides superb image quality and color fidelity, and offers Full HDTV 1080p resolution at 25/30 fps. With 18x optical zoom and autofocus, the camera is ideally suited for remote monitoring situations common in hazardous areas.



The camera features an electro-polished 316L stainless steel housing certified for hazardous areas according to, among others, ATEX and IECEx. The PTZ camera delivers 360º endless rotation with up to 45º/s pan speed and ±90° tilt with up to 24º/s tilt speed.



Critical infrastructure



XP40-Q1765 is ideally suited for large area video surveillance monitoring in hazardous areas in critical infrastructure such as onshore, offshore and marine environments in the oil and gas industry. In addition, typical application areas are also dusty environments in other industries, for example, paper and textile industries, and grain handling.



Wide temperature range



The outdoor-ready XP40-Q1765 comes in two product versions, depending on the required temperature range: either up to +60 ºC (+140 ºF) or down to -60 ºC (-76 ºF). A removable weather shield is supplied with the camera.



Flexible integration and remote accessibility



XP40-Q1765 provides a high level of flexible integration possibilities with other equipment, such as access control, illumination and audio. It offers remote accessibility, using any existing IP-based networks. XP40-Q1765 for hazardous areas is a complement to Axis’ wide range of network cameras that can be used in safe areas.
Axis
0836-031

Data sheet

Certification
EN 55022 Class A, EN 61000-3-2, EN 61000-3-3,\nEN 55024, EN 61000-6-1, EN 61000-6-2,\nFCC Part 15 Subpart B Class A, ICES-003 Class A,\nC-tick AS/NZS CISPR 22 Class A, IEC/EN 60950-1,\nIEC/EN 60950-22, EN 50121-4, IEC/EN 60529 IP66,\nNEMA 250 Type 4x, IEC
Connectivity technology
Wired
Day/night mode
Y
Depth
512 mm
Ethernet LAN
Y
Form factor
bullet
Height
480 mm
Housing material
Stainless steel
HTTPS encryption
Y
International Protection (IP) code
IP67
IP address filtering
Y
Maximum resolution
1920 x 1080 pixels
Minimum illumination
0.04 lx
Mounting type
Ceiling/wall
Operating temperature (T-T)
-60 - 40 °C
Optical sensor size
1/2.9 "
Placement supported
Outdoor
Power source type
AC
Sensor type
CMOS
Supported network protocols
IPv4/v6, HTTP, HTTPS, SSL/TLS, QoS Layer 3 DiffServ, FTP, CIFS/SMB, SMTP, Bonjour, UPnP TM , SNMP v1/v2c/v3 (MIB-II),DNS, DynDNS, NTP, RTSP, RTP, SFTP, TCP, UDP, IGMP, RTCP, ICMP,DHCP, ARP, SOCKS, SSH
Video compression formats
H.264,M-JPEG,MPEG4
Viewing angle, horizontal
59 °
Viewing angle, vertical
35 °
Weight
50000 g
Wide Dynamic Range (WDR)
Y
Width
475 mm
Number of cameras
1