APC Back-UPS Pro
Power Saving Back-UPS Pro 1500, 230V
Green mode
Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Power-saving outlets
Automatically cuts power to idle equipment to conserve electricity.
Resettable circuit breaker
Easy recovery from overloads; no need to replace a fuse.
Extendable Run Time
Additional batteries can be added to provide power to the load for an extended period of time in the event of utility supply failure.
Battery-protected and surge-only outlets
Reserves power capacity and run time for connected equipment that require battery back-up while providing surge only protection for less critical equipment
Cold-start capable
Provides temporary battery power when the utility power is out.
Serial Connectivity
Use any Home Automation network to monitor and control the S20 through its RS-232 serial port. For information on how to communicate with the S20, see APC's Application Note #102. Crestron and AMX installers should visit their respective websites for information on how to integrate the S20 into those networks.
Hot-swappable batteries
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
Disconnected battery notification
Warns when a battery is not available to provide backup power.
Dataline Surge Protection
Provides protection of connected equipment from power surges on the data lines.
Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Adjustable voltage-transfer points
Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.
Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Power-saving outlets
Automatically cuts power to idle equipment to conserve electricity.
Resettable circuit breaker
Easy recovery from overloads; no need to replace a fuse.
Extendable Run Time
Additional batteries can be added to provide power to the load for an extended period of time in the event of utility supply failure.
Battery-protected and surge-only outlets
Reserves power capacity and run time for connected equipment that require battery back-up while providing surge only protection for less critical equipment
Cold-start capable
Provides temporary battery power when the utility power is out.
Serial Connectivity
Use any Home Automation network to monitor and control the S20 through its RS-232 serial port. For information on how to communicate with the S20, see APC's Application Note #102. Crestron and AMX installers should visit their respective websites for information on how to integrate the S20 into those networks.
Hot-swappable batteries
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
Disconnected battery notification
Warns when a battery is not available to provide backup power.
Dataline Surge Protection
Provides protection of connected equipment from power surges on the data lines.
Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Adjustable voltage-transfer points
Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.
Data sheet
- AC outlet types
- C13 coupler
- AC outlets quantity
- 10 AC outlet(s)
- Battery capacity
- 187 VAh
- Battery recharge time
- 8 h
- Battery technology
- Sealed Lead Acid (VRLA)
- Bundled software
- PowerChute Personal Edition
- Cable length
- 1.83 m
- Cables included
- Phone (RJ-11),USB cable
- Certification
- A-tick, C-tick, CE, GOST, GS Mark, Telepermit, TUV, REACH, PEP, EOLI, NEMKO-GS
- Colour of product
- Black
- Crest factor
- 3:1
- Depth
- 380 mm
- Display
- LCD
- Efficiency
- 98.9 %
- Energy Star certified
- Yes
- Height
- 301 mm
- Input connection type
- IEC-320 C14
- Input operation voltage (max)
- 600 V
- Input operation voltage (min)
- 156 V
- Noise level
- 97.4 dB
- Nominal input voltage
- 83 - 159 VAC
- Nominal output voltage
- 400V
- Non-operating altitude
- 9144 m
- Operating altitude
- 0 - 9000 m
- Operating relative humidity (H-H)
- 0 - 95 %
- Operating relative humidity range
- 0 - 95 %
- Operating temperature (T-T)
- 8 - 35 °C
- Operating temperature range (T-T)
- 0 - 40 °C
- Output connections
- 5x IEC 320 C13 (Battery Backup)
5x IEC 320 C13 (Surge Protection) - Output power
- 865 W
- Output power capacity (VA)
- 1500 VA
- Package height
- 387 mm
- Package weight
- 14300 g
- Package width
- 985.6 mm
- Power supply input frequency
- 50/60 Hz
- Quantity per pallet
- 20 pc(s)
- Replacement battery cartridge
- APCRBC124
- RoHS compliance
- Yes
- Source data-sheet
- Icecat.biz
- Storage relative humidity (H-H)
- 0 - 95 %
- Storage relative humidity range
- 0 - 95 %
- Storage temperature (T-T)
- -15 - 40 °C
- Storage temperature range (T-T)
- -15 - 40 °C
- Surge energy rating
- 441 J
- Surge protection features
- Digital Subscriber Line (DSL),Fax,Modem,Network,Telephone
- Typical backup time at full load
- 3.7 min
- Typical backup time at half load
- 12.4 min
- Waveform
- Square
- Weight
- 12700 g
- Width
- 112 mm
Specific References
- EAN13
- 0731304268741
You might also like
Power Saving Back-UPS Pro 1500, 230V